{0}------------------------------------------------
## **ZPH2025-00012 DIMENSIONAL REQUIREMENTS & PERMITTED USES TEXT AMENDMENT DRAFT LANGUAGE - 6/16/2025 VERSION 2** 

~~Strikethrough -~~ deletion 

## Underlined addition 

Blue is requested Planning Board Additions 

## **Sec. 78-581. - Definitions.** 

_Building, setback line_ means a line delineating the minimum allowable distance between the property line and a building on a lot, within which no building or other structure shall be placed except as otherwise provided. Front setback lines shall be measured from the ~~highway~~ road right-of-way, the maintenance line for the public road that does not have a defined right-of-way, or the property line if neither a road right-of-way or maintenance line is present. ~~For purposes of the Beaverdam District only, front setback lines shall be measured from the edge of the road.~~ 

_Setback_ means a continuous strip of land, measured perpendicular from the plane of the building or structure out to the closest property line or road right-of-wa ~~y, except as otherwise provided in the Beaverdam Zoning District~~ . 

## **Sec. 78-640. - Statement of district intent.** 

(j) Beaverdam Low-Density Residential District (BDM). It is the purpose and intent of the Beaverdam Low-Density Residential District to protect existing and future development in Beaverdam Valley from incompatible uses ~~;,~~ and to provide for ~~low-density~~ single- and two-dwelling residential development and agricultural uses. ~~; and, to set certain standards for such uses based upon an analysis of existing and future conditions of topography, access, public water and sewer utilities, and community facilities, as well as health, safety and general welfare considerations.~~ 

## **Sec. 78-641. - Permitted uses.** 

(a) Permitted use table. Uses are permitted in the various zoning districts pursuant to Table 1. 

**Table 1—Permitted Use Table**
{1}------------------------------------------------
|**Uses**|||||**P = Permitted**<br>~~**C **~~**S= Allowed as**~~**Conditional **~~**SpecialUse**<br>**SR = Permitted with Special Requirements**<br>**Blank Space = Not Permitted**|**P = Permitted**<br>~~**C **~~**S= Allowed as**~~**Conditional **~~**SpecialUse**<br>**SR = Permitted with Special Requirements**<br>**Blank Space = Not Permitted**|**P = Permitted**<br>~~**C **~~**S= Allowed as**~~**Conditional **~~**SpecialUse**<br>**SR = Permitted with Special Requirements**<br>**Blank Space = Not Permitted**|**P = Permitted**<br>~~**C **~~**S= Allowed as**~~**Conditional **~~**SpecialUse**<br>**SR = Permitted with Special Requirements**<br>**Blank Space = Not Permitted**|||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|||||||**Districts**|||||||
||**R-LD**|**R-1**|**R-2**|**R-3**|**NS**|**CS**|**EMP**|**PS**|**CR**|**AI**|**BDM**|**OU**|
|Two residential dwelling units<br>(attached or detached)|P|P|P|P|P|P|P|P|P||P|P|
|Subdivisions, alternative path<br>hillside development|P|P|P|P|P|P|P|P|P||P|P|
|Subdivision,  conservation<br>development|P|P|P|P|P|P|P|P|P||P|p|



## **Sec. 78-642. Dimensional requirements.** 

The dimensional requirements for structures and land in the various zoning districts shall be in accordance with Table 2. 

||||||**Table 2. Dimensional Requirements**|**Table 2. Dimensional Requirements**|**Table 2. Dimensional Requirements**|**Table 2. Dimensional Requirements**|**Table 2. Dimensional Requirements**|**Table 2. Dimensional Requirements**|**Table 2. Dimensional Requirements**|**Table 2. Dimensional Requirements**|**Table 2. Dimensional Requirements**|||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|**Districts**||**Min.**<br>**Lot Size**<br>**1, 2, 4, 5**<br>**(Square**<br>**Feet)**||**Density 2,**|**4**|||**Min. Yard**|**Setback Requirements in Feet 3, 4**||||||**Max.**<br>**Height**<br>**(Feet)**||**Disturbe**<br>**d &**<br>**Impervio**<br>**us Limits**<br>**(Lot size**<br>**acreage)**|
|||||**Min.**<br>**Land**<br>**Area Per**<br>**Dwelling**<br>**(sq ft)**||**Maximum**<br>**Number**<br>**Dwelling**<br>**Units Per**<br>**Acre**|<br><br> <br><br>|**Front**<br>**Yard**<br> <br>**Public**<br>**Sewer**|**Side**<br>**Yard**<br> <br>**Public**<br>**Sewer**|**Rear**<br>**Yard**<br> <br>**Public**<br>**Sewer**||**Front**<br>**Yard**|**Side**<br>**Yard**|**Rear**<br>**Yard**||||
|BDM<br>Beaverdam||~~See Footnote~~<br>~~6 and 8~~<br>30,000 (no<br>public<br>sewer);<br>20,000<br>(public<br>sewer)||~~See~~<br>~~Footnote~~<br>~~6 and 8~~ <br>~~No more~~<br>~~than 1~~<br>~~unit per~~<br>~~lot~~<br>No more<br>than 2||~~See~~<br>~~Footnote 6~~<br>~~and 8~~<br>~~No more~~<br>~~than 1 unit~~<br>~~per lot~~<br>2 units per<br>lot|<br> <br>|~~See~~<br>~~Footnote~~<br>~~7 and 8~~<br>10|~~15~~<br>10|~~25 ~~<br>20||~~See~~<br>~~Footnote~~<br>~~7 and 8~~<br>10|~~15~~<br>10|~~25 ~~<br>20|35||<0.5<br>acre: N/A<br>0.5-1<br>acre:<br>80% /<br>60%|
{2}------------------------------------------------
||||units per<br>lot||||||||||1-4 acre:<br>60% /<br>45%<br>5-9 acre:<br>40% /<br>30%<br>10+ acre:<br>30% /<br>20%|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|



~~Footnotes 7—9: Applicable to Beaverdam Low-Density Residential District (BDM) only.~~
{3}------------------------------------------------
## ~~Footnote 7—Beaverdam Only Development standards:~~ 

||~~% Natural Slope~~||~~Lot Frontage~~<br>~~(Feet)*~~||~~Minimum~~<br>~~Lot Size~~<br>~~(Acres) ~~||~~Maximum Disturbed~~||~~Maximum~~<br>~~Impervious~~<br>~~Cover(Acres) ~~|
|---|---|---|---|---|---|---|---|---|---|
||||||||~~If lot is < 0.75 Acres: 80% of lot~~||~~tab>~~|
||~~0—9.99~~<br>~~with public~~ <br>~~water and~~<br>~~sewer~~||~~100~~||~~0.5~~||~~If lot is < 0.75 Acres: 80% of lot~~||~~0.375~~|
||||||||~~If lot is 0.75—1 Acres: 75% of lot~~|||
||||||||~~If lot is > 1 Acre: 0.75 acres~~|||
||~~0—9.99~~<br>~~no public~~ <br>~~water and~~<br>~~sewer~~||~~100~~||~~1.1~~||~~0.75 Acres~~||~~0.375~~|
||~~10—14.99 with~~<br>~~or without public~~<br>~~utilities~~||~~100~~||~~1.1~~||~~0.75 Acres~~||~~0.375~~|
||~~15—19.99 with~~<br>~~or without public~~<br>~~utilities~~||~~100~~||~~1.5~~||~~0.75 Acres~~||~~0.375~~|
||~~20—24.99 with~~<br>~~or without public~~<br>~~utilities~~||~~150~~||~~2~~||~~0.75 Acres~~||~~0.375~~|
||~~25—29.99 with~~<br>~~or without public~~<br>~~utilities~~||~~150~~||~~2~~||~~0.75 Acres~~||~~0.375~~|
||~~30—34.99 with~~<br>~~or without public~~<br>~~utilities~~||~~175~~||~~2.5~~||~~0.75 Acres~~||~~0.375~~|
||~~35—39.99 with~~<br>~~or without public~~<br>~~utilities~~||~~175~~||~~3~~||~~0.75 Acres~~||~~0.375~~|
||~~40+ with or~~<br>~~without public~~<br>~~utilities~~||~~200~~||~~5~~||~~0.75 Acres~~||~~0.375~~|
{4}------------------------------------------------
~~*~~ ~~_Minimum lot frontage shall be 75 feet where adjoining a cul-de-sac._~~ 

## ~~Footnote 8—Beaverdam Only~~ 

||~~% Natural Slope~~||~~Minimum Yard Setback Requirements~~|~~Minimum Yard Setback Requirements~~|~~Minimum Yard Setback Requirements~~|||
|---|---|---|---|---|---|---|---|
||||~~Front Yard From Edge of~~<br>~~Road(Feet) ~~||~~Side Yard (Feet)~~||~~Rear Yard (Feet)~~|
||~~0—39.99~~||~~35~~||~~15~~||~~25~~|
||~~40+~~||~~15~~||~~15~~||~~25~~|



## ~~Footnote 9—Beaverdam Only~~ 

- ~~a. The natural slope is calculated using the following formula:~~ 

~~S% = 0.0023×I×L~~ 

~~A~~ 

## ~~Where:~~ 

~~S = Average natural slope of parcel in percent~~ 

~~I = Contour interval of map in feet, with said intervals to be five feet or less~~ 

~~L = Total length of the contour lines within the parcel in feet~~ 

- ~~A = Area of the parcel in acres~~ 

## ~~0.0023 = Constant which converts square feet into acres~~ 

- ~~b. In addition, applicants may submit an alternate method of slope calculation for consideration. These methods may include, but are not limited to, the following methods: weighted average, slope mapping, other field based techniques, etc.~~
